Besil 9102 9103 9106 oxime type good adhesion rtv silicone sealant

Home > Product > Potting Material > Silicone Material > BeSil 9102 9103 9106

Besil 9102 9103 9106 oxime type good adhesion rtv silicone sealant

Resistance to moisture, dirt and other atmospheric components
Reduce the mechanical stress and tension caused by mechanical, thermal shock and vibration
Excellent electrical insulation, anti-corona
Outdoor aging excellent, the service life of up to 20-30 years
To overcome the 280 ℃thermal aging test under the smoke, bubbling, sticky and powder phenomenon

Features

Besil 9103 series sealant at room temperature to absorb moisture in the air and curing, is a special silicone rubber material as the base material made of silicone adhesive sealant, can not heat curing.

It is the vast majority of materials have a good adhere sealing performance, protecting in the harsh conditions of electronic products.

Data Sheet

Item	Method	UNIT	9102	9103	9106R
Before cured
Appearance	Visual inspection	—	Red	Red	Red
Viscosity	GB/T 2794-2013	25℃, mPa·s	paste	80000	20000
Density	GB/T 15223-1994	25℃, g/cm³	1.30±0.05	1.28±0.05	1.15±0.05
Tack free time	GB/T13477.5-2002	25℃, 55%RH,min	20±5	20±5	20±5
After cured
Hardness	GB/T 531-2008	Shore A	35	35	30
Thermal conductivity	GB/T 10297-1998	W/m.K	0.27	0.27	0.27
Elongation at break	GB/T 528-2009	%	≥250	≥250	≥250
Tensile strength	GB/T 528-2009	Mpa	2.5	1.8	1.2
Shear strength	GB/T 7124-2008	Mpa, iron/iron	2.0	1.5	1.2
Expansion coefficient	GB/T20673-2006	μm/（m，℃）	210	210	210
Water absorption	GB/T 8810-2005	24h，25℃，%	0.003	0.003	0.003

Application

Steam iron
oven
high temperature air filter
high temperature oven
high temperature pipe and other industrial products
high temperature requirements

How to use

Application:

clean the surface: the sticky or coated surface will be clean, clean with detergent to remove rust, dust and oil and so on.
sizing: the plastic mouth cut to the required size, into the glue gun. Squeeze the glue into the clean surface, so that the distribution of uniform. When bonding, it will be fixed by the sticky surface.
curing: the painted parts will be placed in the air, room temperature 24 hours curing about 2mm thickness.
Note: Open as soon as possible once ran out, once not used up, re-use, squeeze the cured part, continue to use, does not affect the normal use.
The use of dispensing equipment, please contact BEGINOR market sector.
A large area after the need to meet the temperature of 300 degrees of application technology. After 3
days of solidification of silica gel, the initial temperature rise procedure should be carried out before the high temperature environment of 300 degrees: After the colloid is fully cured (8mm thickness is 24 days at 23 ℃ 55% humidity, the curing time should be prolonged when the temperature and humidity are low) 80 ° C → 120°C → 160°C → 200°C → 220°C → 240°C → 260°C → 280°C → 300°C. The
program temperature is kept for 60 min.

Packing and Stocking

310 ML/tube,25 pcs/box
The storage period at 25 ℃ is 12 months. Over the storage period please sampling test.

TDS Download

[auth-download url=”https://beginor-chemical.com/wp-content/uploads/2019/03/TDS-of-BESIL-9102-silicone-adhesive.pdf” title=”TDS Download BeSil 9102″]
[auth-download url=”https://beginor-chemical.com/wp-content/uploads/2019/03/TDS-of-BESIL-9103-silicone-adhesive.pdf” title=”TDS Download BeSil 9103″]
[auth-download url=”https://beginor-chemical.com/wp-content/uploads/2019/03/TDS-of-BESIL-9106-silicone-adhesive.pdf” title=”TDS Download BeSil 9106″]